Chinese     English
Home About News£¦events Products Certificates Feedback Contact
 
Insulation material series
Complete cabinet series
Cable accessories & insulati¡­
Outdoor vacuum circuit break¡­
 Products Location: Home > Products
It is non woven F adhesive compound and into polyester fiber with high melting point polyester film and manufacturing for hot rolling method. It has good mechanical, electrical, thermal properties and good impregnation, Temperature rating Class F.
Class F DMD
It is made of non-woven polyester mat bonded to both sides of an electrical grade polyester film using heat-resistant resin, and then bake to half-solidified laminate, It is steady thermal-bond adhesive material, and its thermal class is F(155¡æ)
DMD Pre-impregnated Material
Insulating paper of the GS643 Lingge dispensing inodified adhesive was Lingg-like coating on the surface of the insulation of soft composite materials made of semicuring flexible materials for electrical. Temperature rating Class B.
The GS643 Lingge dispensing insulating paper
It is using the electrical special quality cable paper. Its double-sided make of the modified epoxy resin and the lingge conformal coating with the glue. It is the long-term is widely used in various types of oil-immersed transformers and transformer do layer or interturn insulation. It has been widely adopted by the transformer industry and recognition.
The DDP Epoxy Lingge Dispensing Insulating Paper(DDP)_
GHG compound sheet is the three-layer flexible compound material which is made of polyimide film bonded with E-glass cloths on both sides. It has good mechanical, electric, thermal and flame retardant properties
GHG Compound Sheet
It is made of polyimide film bonded with non-alkali fiberglass cloth on both sides, then impregnated with H class heat-resistant resin and last baked into half-solid shape. It is a reliable adhesive, and the thermal class is H.
GHG Pre-impregnated Material
A series of flexible composites composed of polyimide film and non-woven polyester fiber mat. Laminated with a class-H adhesive system. Then impregnated with half-solidified epoxy resin. Thermal class is H(180¡æ)
SHS Pre-impregnated Material
PET composite membrane is coated with F grade polyurethane adhesive which is made of two or more layers of polyester membrane bonded multi-storey semi-soft composite
PET Composite membrane
Easy immersion type electrical polyester non woven fabrics with high strength and low elongation polyester fiber as raw material, adopt air laid non woven fabric, hot forming. It has a uniform porosity, low apparent density, good performance with impregnation, It is apply to the laminate substrate, dry-type power transformer coil layer insulation, electric motor coil dressing and liner insulation etc..¡£
Easy immersion type electrical polyester non woven fabrics
The electrical crepe paper is composed of insulating paper which is 100% pure imported pulp production£¬It is the special wrinkle processed£¬Its oil soluble performance is very Good, widely used in oil immersed transformer, transformer, reactor winding parts, wire insulation insulate on package parts, so as to improve the insulation Electrical and mechanical properties.
Electrical Crepe Paper
Epoxy resin board is by the electrician non alkali glass fiber cloth impregnated with epoxy, phenolic resin, drying, hot pressing plate insulation laminated products¡£Suitable for the mechanical, electrical and electronic components with high insulation structure, and can be used in the wet conditions and the oil of the transformer, which has high mechanical and dielectric properties of heat resistance and moisture resistance. Heat resistant grade B, grade F.
3240 Epoxy Resin Board
Solvent-free Fiberglass Mesh is made of E-glass fiber mesh soaks some special epoxy resin, and then bake them, after this it becomes solvent-free prepreg insulation mesh for transformer.
Solvent-free Fiberglass Mesh on Transformer
It is braided into reticulation structure by fiberglass yarn. and then coated with epoxy resin and baked. It is used as reinforce orientation on cast resin electric appliance.
Fiberglass Mesh
E-glass tape is made of glass fiber yarns, of which the alkali metal is less than 0.8%.
E-glass Tape
Fiberglass Sleeving is made of non-alkali Fiberglass yarn that knitted into semi-finished sleeving, with which coated varies kinds of special resin and then baked.
Fiberglass Sleeving
It is made of braiding with the special polyester fiber thread. It had good properties of chemical and insulation. So it is suitable used as banding material of transformer, electric machinery and electric appliance.
Heat Shrinkable Tape
Polyester Resin impregnated Fiberglass banding tape is composed of alkali free twist glass fiber yarn t through a special high-temperature curing of unsaturated polyester resin impregnated. Banding tape has good flexibility and viscosity, opened the reticular structure, unwinding easily, no filoselle, no folds. It has high strength, impact resistance, high modulus, low elongation, no hysteresis and no eddy current loss of performance, which is the motor, transformer and arrester ideal binding material.
Polyester Resin impregnated Fiberglass banding tap
Electrical cotton tape For motor and transformer coil insulating binding. It has Plain and twill, standard width: (mm) 15, 20, 25, 30.
Electrical cotton tape
PMP polyester film capacitor paper composite foil is the three layer soft composite material ,which use the high performance adhesives to compound a layer of polyester film and two layer capacitor paper.£¨PMP£©
PMP Polyester Film Capacitor Paper Composite Foil
H class glass cloth tape uses the high quality glass cloth as the basic material, then soak the class H adhesive and made the glue tape.
H Class Insulation Heat Resistant Silicone Adhesive Coated Fiber Glass Cloth Tape
1/1 Previous Next  
Copyright © Mianyang Guoshun Electrical Co., Ltd. ¡¡Tel:+86-0816-3234251¡¡Fax:+86-0816-3232597¡¡Web:http://www.mygsdq.com
Add:Zhongba Town, Jiangyou City, Sichuan Province, China¡¡Design:ET3515